Справочник Пользователя для Pelco df8cl-pg-e1v2a

Скачать
Страница из 12
10
C2433M-E (11/06)
Maintenance
Clean the acrylic dome as needed. Be careful not to scratch the surfaces of the dome.
EXTERIOR SURFACE
Clean the dome’s exterior surface with a nonabrasive cleaning cloth and agent that is safe for acrylic plastic. Either liquid or spray cleaner/wax 
suitable for fine furniture is acceptable.
INTERIOR SURFACE 
SMOKED OR CLEAR
 Clean the same as the exterior surface.
CHROME OR GOLD
The inside surface of a chrome or gold dome is easily scratched. Use the following precautions to maintain the dome’s surface.
Always handle the dome from the outside of its circular flange.
Never touch the coated inside surface. The acid in your fingerprints will eventually etch the coating if the fingerprints are not carefully 
removed according to the Recommended Cleaning Procedure section.
If dust or other contaminants accumulate on the dome’s interior, remove the debris with compressed air. Compressed air cans are available 
from photographic equipment or electronic supply dealers.
If heavy residue accumulates and cannot be removed with air pressure, rinse with water and immediately dry with air pressure so that 
water spots will not remain. Avoid wiping the coated surface with direct hand pressure; it will easily abrade unless extreme care is taken. 
If scratched, the dome cannot be repaired.
RECOMMENDED CLEANING PROCEDURE
If internal wiping is necessary, avoid hand rubbing. Instead, make a wick as follows: 
1. Use a very soft paper towel. Roll a section into a tightly wound tube. 
2. Tear the tube in half, and wet the fuzzy end of the wick with a solution of isopropyl alcohol diluted with water. 
3. Hold the dome with its opening facing downward and wipe the interior of the dome with the wet end of the wick. Use a circular motion, 
starting from the outside and spiraling into the center. 
4. Use a new wick for each two passes over the dome.
SERVICE MANUAL
If you need to service your unit, obtain a service manual in one of the following ways:
Go to Pelco’s web site at www.pelco.com and find service manual C2433SM. 
Contact Pelco’s Literature Department and request service manual C2433SM.