Руководство Пользователя для Pelco ix10c12-ea
C2950M-F (12/10)
7
Introduction
The IX Series camera is a network-based camera with a built-in, Web-based viewer for live streaming to a standard Web browser (Microsoft
®
Internet Explorer
®
or Mozilla
®
Firefox
®
). All camera models are preloaded with Pelco’s Camera Sabotage behavior, which can be configured and
enabled using a standard Web browser.
The camera features open architecture connectivity for third-party applications and is Endura Enabled
™
and compatible with Digital Sentry
®
to
record, manage, configure, and view multiple live streams. Some models are also compatible with DX8100 Series and DVR5100 Series digital
video recorders.
video recorders.
The camera supports up to three compression formats and many resolutions. The two standard compression formats include H.264 and MJPEG.
MPEG-4 is also available with IXS0 models. The dual streams can be configured to a variety of resolutions, frame rates, and bit rates.
MPEG-4 is also available with IXS0 models. The dual streams can be configured to a variety of resolutions, frame rates, and bit rates.
The camera includes 0.5, 1.3, and 3.1 megapixel (MPx) models available in two camera styles: color or day/night. The day/night models have a
mechanical IR cut filter that increases camera sensitivity in low light situations. The camera uses a 1/3-inch imager and accommodates
CS-mount lenses.
mechanical IR cut filter that increases camera sensitivity in low light situations. The camera uses a 1/3-inch imager and accommodates
CS-mount lenses.
The camera also includes built-in Power over Ethernet (PoE), which supplies power to the camera through the network. If PoE is not available, the
camera is prewired for 24 VAC.
camera is prewired for 24 VAC.
MODELS
Getting Started
Before installing your camera, thoroughly familiarize yourself with the information in this section.
NOTES:
•
Pelco recommends connecting the camera to a network that uses a Dynamic Host Configuration Protocol (DHCP) server to address devices.
•
Do not use a network hub when configuring the network settings for the camera.
•
To ensure secure access to the IP camera, place the camera behind a firewall when it is connected to a network.
PARTS LIST
Installation tools and the following parts are needed but not supplied
:
IXS0C
Sarix IX Series, network camera, 0.5 MPx standard definition color
IXS0DN
Sarix IX Series, network camera, 0.5 MPx standard definition day/night
IX10C
Sarix IX Series, network camera, 1.3 MPx color
IX10DN
Sarix IX Series, network camera, 1.3 MPx day/night
IX30C
Sarix IX Series, network camera, 3.1 MPx color
IX30DN
Sarix IX Series, network camera, 3.1 MPx day/night
Qty Description
1
Camera
1
Ferrite (for Class B compliance)
1
6-pin connector
1
IX Series Quick Start Guide
1
Resource disc
3
MAC address labels (extra)
Qty Description
1
Lens (use either a megapixel or standard auto iris lens, depending on the camera model)
1
Service cable (IX-SC)
1
Mounting hardware