Справочник Пользователя для NEC LCD1970NX
13
Monitor
MultiSync
®
LCD
1970V
™
Notes
Specifications
Monitor
LCD Module
Diagonal :
19.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size :
19.0 inch
liquid crystal display (LCD); 0.294 mm dot
Native Resolution (Pixel Count) :
1280 x 1024
pitch; 250cd/m
2
white luminence;
450:1 contrast ratio, typical
Input Signal
Video :
ANALOG 0.7 Vp-p/75 Ohms
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors
16,777,216
Dependent on display card used.
Maximum
Left/Right :
65°/65° (CR>10)
Viewing Angles
Up/Down :
65°/65° (CR>10)
Synchronization
Horizontal :
31.5 kHz to 81.0 kHz
Automatically
Range
Vertical :
56.0 Hz to 75.0 Hz
Automatically
Resolutions Supported
720 x 400*
1
:VGA text
Some systems may not support all modes listed.
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 1024 @ 60 Hz to 75 Hz .......................... NEC-Mitsubishi Electronics Display cites
recommended resolution at 60 Hz for
optimal display performance.
optimal display performance.
Active Display Area
Horizontal :
376.3 mm/14.8 inches
Vertical :
301.1 mm/11.9 inches
Power Supply
100 – 240 V ~ 50/60 Hz
Current Rating
0.7 – 0.36A
Dimensions
412.5 mm (W) x 386.5-496.5 mm (H) x 220 mm (D)
16.2 inches (W) x 15.2-19.5 inches (H) x 8.7 inches (D)
16.2 inches (W) x 15.2-19.5 inches (H) x 8.7 inches (D)
Weight
7.0 kg
15.4 lbs
15.4 lbs
Environmental Considerations
Operating Temperature :
5°C to 35°C/41°F to 95°F
Humidity :
30% to 80%
Feet :
0 to 10,000 Feet
Storage Temperature :
-10°C to 60°C/14°F to 140°F
Humidity :
10% to 85%
Feet :
0 to 30,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
Specifications
LCD19PISAManual080504.p65
8/6/04, 4:56 PM
13