Справочник Пользователя для EchoStar dsb-880 2ci
EchoStar User Interface
Section 1
S/W Version 1.0
Page 1 - 1
© 2
003 E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll ri
g
h
ts
re
s
e
rv
ed
English
1
INITIAL INSTALLATION
1.
INTRODUCTION
The satellite receiver is pre-programmed with the FTA channels for ASTRA1 and HOTBIRD
as know during the manufacturing of the receiver. Note that it is possible to update the
channel lists easily, for a detailed instruction, please refer to installation update. The pre-
programmed channels are only for use in a single fixed dish installation with a so called
universal LNB. If your installation is different some extra programming needs to be done. For
a detailed instruction, please refer to the Guided setup.
as know during the manufacturing of the receiver. Note that it is possible to update the
channel lists easily, for a detailed instruction, please refer to installation update. The pre-
programmed channels are only for use in a single fixed dish installation with a so called
universal LNB. If your installation is different some extra programming needs to be done. For
a detailed instruction, please refer to the Guided setup.
2.
NAVIGATION
The EchoStar User Interface has various ways to navigate through the menus and functions.
Some of the keys on the remote control unit give direct access to functions. Important keys
are identified as EPG, colored keys, MENU, OK and EXIT. Other keys are multi-functional
which means that their function can change with the selections you make.
Some of the keys on the remote control unit give direct access to functions. Important keys
are identified as EPG, colored keys, MENU, OK and EXIT. Other keys are multi-functional
which means that their function can change with the selections you make.
3.
TO INSTALL YOUR RECEIVER FOR THE FIRST TIME
This section assumes that the dish installation is completed and operational and your
receiver is connected to your TV and other equipment with suitable cables. Note that your
receiver is pre-programmed for a fixed dish installation with a universal LNBF. If you have
another dish installation (multiple LNBs or motorized), additional settings are required.
receiver is connected to your TV and other equipment with suitable cables. Note that your
receiver is pre-programmed for a fixed dish installation with a universal LNBF. If you have
another dish installation (multiple LNBs or motorized), additional settings are required.
NOTE
Unless otherwise specified; this note explains the navigation through the menus and
functions.
In the main, user and EPG menu:
1. the MENU key lets you access to the main menu or go back one menu level;
2. the EXIT key lets you leave a menu or selection and return directly to live;
functions.
In the main, user and EPG menu:
1. the MENU key lets you access to the main menu or go back one menu level;
2. the EXIT key lets you leave a menu or selection and return directly to live;
3. the
keys let you scroll up and down through the selectable items;
4. the
keys let you scroll left and right through the selectable items;
5. The OK key lets you:
- confirm and execute a selection;
- open a pull-down menu.
- open a pull-down menu.
In a pull-down menu:
1. the OK key lets you confirm the selection;
2. the highlighted cursor indicates the active selection.
1. the OK key lets you confirm the selection;
2. the highlighted cursor indicates the active selection.
NOTE
For receivers that are connected with an UHF cable, make sure that the TV is set to
UHF channel 38 (607.25Mhz). If the channel number on the TV and receiver are not
the same, you will have a distorted or no image at all.
For more information, please refer to the user manual of the TV.
UHF channel 38 (607.25Mhz). If the channel number on the TV and receiver are not
the same, you will have a distorted or no image at all.
For more information, please refer to the user manual of the TV.
NOTE
For receivers that are connected with a SVHS cable, make sure that the audio to the
TV is connected with either the S/PDIF or the AUDIO L/R connector.
For more information, please refer to the user manual of the TV/VCR.
TV is connected with either the S/PDIF or the AUDIO L/R connector.
For more information, please refer to the user manual of the TV/VCR.
NOTE
From the next step onwards, the procedure is divided in different installation
procedures. The given procedures are; Fixed, Multiple LNBs, DiSEqC1.2 and GoTo X.
procedures. The given procedures are; Fixed, Multiple LNBs, DiSEqC1.2 and GoTo X.
■
Fixed means install a single dish with an Universal LNB;
■
Multiple LNBs means install a dish with multiple LNBs or multiple dishes;
■
DiSEqC1.2 means install a moveable dish according the DiSEqC1.2 spec;
■
GoTo X means install a moveable dish that is GoTo X compatible.