Руководство Пользователя для Yamaha RX-Z11

■ Decoder Mode (Default decoder mode)

Use this feature to designate the default decoder mode (see page 97) 
for the input sources when you turn on the power of this unit.

■ EXTD Surround 

Use this feature to designate the extended surround decoder mode 
(see page 87) for the input sources connected to the DIGITAL 
INPUT jacks when you turn on the power of this unit.

■ Memory Guard (Memory guard)

Use this feature to prevent accidental changes to sound field 
program parameter values and other system settings.

y
When you select the protected parameter, “

” appears at the bottom left of 

the GUI screen. You can adjust the parameters when you select the 
parameter and “

” does not appear at the bottom left of the GUI menu even 

if “Memory Guard” is set to “On”.

■ HDMI Set (HDMI settings)

Use this feature to adjust the HDMI support audio.

Support Audio (Support audio)
Use this feature to select whether to play back HDMI audio signals 
on this unit or on another HDMI component connected to the 
HDMI OUT jacks on the rear panel of this unit.

Available audio/video signals depend on the specification of the connected 
video monitor. Refer to the instruction manual of each connected 
component.

Standby Through (Standby through)
Use this feature whether this unit allows the HDMI signals input at 
the HDMI IN jacks to pass thorough this unit when this unit is in the 
standby mode. You can also designate an HDMI IN jack and an 
HDMI OUT jack that accept the signals when “Standby Through” is 
set to “On” and this unit is in the standby mode. 

• When “Standby Through” is set to “On” and this unit is in the standby 

mode, the audio signals are only output at the HDMI OUT 1 or HDMI 
OUT 2.

• When “Standby Through” is set to “On”, the amount of power 

consumption in the standby mode is increase.

Input/output jack select
When “Standby Through” is set to “On”, you can designate an 
HDMI IN jack and an HDMI OUT jack that accept the signals when 
this unit in in the standby mode. 

Input (HDMI IN jack select)
Use this feature to select an HDMI IN jack select that accepts 
HDMI signals when this unit is in the standby mode. 

Output (HDMI OUT jack select) 
Use this feature to select an HDMI OUT jack select that 
outputs HDMI signals when this unit is in the standby mode. 

Automatically detects the type of input signals and select 
the appropriate decoder mode setting.

Automatically selects the last decoder mode setting used 
for the connected input source.

Automatically detects the input digital audio signals and 
activates the appropriate decoder.

Selects the last selected extended surround decoder 
mode.

Turns off the “Memory Guard” feature.

Protects the following parameters:

– sound field program parameters
– GUI menu parameters
– speaker levels settings

Plays back HDMI audio signals on this unit. The HDMI 
audio signals input at the HDMI input jacks of this unit 
are not output to the HDMI component connected to the 
HDMI OUT jacks on the rear panel of this unit.

Plays back HDMI audio signals on another HDMI 
component connected to the HDMI OUT jacks.

Does not accept the HDMI signals when this unit is in 
the standby mode. 

Accepts the HDMI signals when this unit is in the 
standby mode. 

HDMI IN1

HDMI IN2

HDMI IN3

HDMI IN4

Front HDMI IN

HDMI OUT1

HDMI OUT2