Справочник Пользователя для Zhone 1740 shdsl

CHAPTER 7   Routing 

This chapter describes how to set up the static routes and RIP. Click Routing Setup from the Basic menu 
bar to configure the routing functions.  

7.1 Static 

Route 

The Static Route Configuration field allows you to add, modify, and delete a static route. Type the 
Destination Network ID, subnet mask, and next hop IP and click a button below to perform the requested 
function. 

The router has no default static route. After an RFC 1483-routed VC is created, a static route as follows 
will be created. 

Network ID 

Subnet Mask 

 

Next Hop IP 

0.0.0.0 

 0.0.0.0 

  10.0.0.2 

Click Routing Setup on the Basic menu bar to access the Routing Setup window. It allows adding, 
modifying, and deleting the static routes.  

 

To add a static route complete the following steps:  

STEP 1: Enter the parameters for Destination Network ID, Subnet Mask, Next Hop IP 

STEP 2: Click on the ADD button  

To modify a static route complete the following steps: 

STEP 1: Select the entry you wish to modify from the List of Static Routes 

STEP 2: Change the parameters 

STEP 3: Click on the Modify button 

1740-A2-GB20-00                                                                July 2004     

39