Справочник Пользователя для Zhone 2000

- 105 -

To delete a static route from the Route Table:

1. On the Router Modification menu type R to select Remove a Route.
2. The IAD prompts for the address of the route to remove:

Enter address of static route to remove:

Type the IP address of the route to remove and press Enter.

3. The IAD removes the route from the table and the IAD displays the 

Router Modification menu.

4. Repeat these steps for each route that you want to remove.
5. Continue with other configuration tasks, or press Escape to return to 

the Main menu.

6. Reset the IAD (page

) when you finish router configuration.

To add a default route on the WAN, or change the current default route:

1. On the Router Modification menu type F to select Add/Change the 

Default Route.

2. The IAD prompts for the default gateway address. (You may press 0 

for a list of interfaces):
Enter Default Gateway address, or 0 to pick an 
Interface:

Type the default gateway address and proceed to step 3.
-or-
Type 0 to display the port table:
Select default IP interface.

Port VPI VCI Encapsulation Type

PCR

Service

1

0

40 RFC 1483 (with LLC Encap)3641

UBR

Total = 3641 cps

Maximum PCR this interface can support = 3622 cps

Select Port: [1-8]

Type the port to select and press Enter.

3. The default route is set and the Route Table is updated.
4. Continue with other configuration tasks, or press Escape to return to 

the Router Modification menu.

5. Reset the IAD (page

) when you finish router configuration.

To remove the default route from the Route Table:

1. On the Router Modification menu type T to select Remove the Default 

Route.

2. The default route is immediately deleted and the Route Table is 

updated.

3. Continue with other configuration tasks, or press Escape to return to 

the Router Modification menu.

4. Reset the IAD (page

) when you finish router configuration.