Руководство Пользователя для Zhone 5100
About HotWire 5100 DSL Access System
1-3
5100-A2-GB21-00
November 1996
Equipment and Software Requirements
Verify that you have the following hardware and software before installing the
HotWire card.
HotWire card.
Hardware Requirements
80486 (or higher) IBM PC or compatible
8 MB RAM minimum (16 MB RAM recommended)
One 1.44 MB, 3 1/2
″
floppy drive (for installation)
2 MB free disk storage (for program files)
Software Requirements
DOS 5.0 or later
Windows 3.1 (or later) and TCP/IP application with IP stack NDIS 2.01
compliant (see note) or Windows For Workgroups 3.11 (or later) or
Windows 95
compliant (see note) or Windows For Workgroups 3.11 (or later) or
Windows 95
NOTE:
If the TCP/IP software is not installed already, you will be asked to install it as
a step in the Network Driver installation process.
a step in the Network Driver installation process.
HotWire Diagnostics Utility
Use the HotWire Diagnostics Utility supplied with the DSL card for configuring the
card after installation, troubleshooting the card, and downloading firmware. The
Diagnostics Utility provides screen help in standard windows format. Refer to
card after installation, troubleshooting the card, and downloading firmware. The
Diagnostics Utility provides screen help in standard windows format. Refer to
User Interface
The Diagnostics Utility uses standard Windows user interface conventions for all
windows including Help screens.
windows including Help screens.