Руководство Пользователя для Zhone 5100

Using the HotWire Diagnostics Utility

5100-A2-GB21-00

November 1996

Select Loopback from the Diagnostics menu 
to run local or remote loopback tests. 

These tests can help you isolate areas of 
trouble if you are having problems with card 
operation or transmission. During a test:

Your card’s Test LED is solid yellow 
whenever a loopback test is being 
performed.

Any data received from the network 
during loopback testing is lost.

These tests are uni-directional, meaning 
that data is looped back to the PC end 
of the connection only.

For window operation, click on:

Start to start a test. Refer to the

Exit to close the window and return to the main menu without running a test
or after running a test and viewing results.

Options to specify test parameters. Refer to the 

Help to access screen help.

If you cannot run a successful local loopback test, retry the test one or two
times before contacting your customer service representative. However,
before running a remote loopback test, you should always contact your
customer service representative. Also, report a failed remote loopback test to
your customer service representative.