Справочник Пользователя для ZyXEL p-334

Prestige 334 User’s Guide

145

Chapter 13 Remote Management Screens

Figure 53   Remote Management: SNMP

The following table describes the labels in this screen.

Table 42   Remote Management: SNMP

SNMP Configuration

Get Community

Enter the Get Community, which is the password for the incoming Get and 

GetNext requests from the management station. The default is public and allows 

all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests from 

the management station. The default is public and allows all requests.

Trusted Host

If you enter a trusted host, your Prestige will only respond to SNMP messages 

from this address. A blank (default) field means your Prestige will respond to all 

SNMP messages it receives, regardless of source.

Trap

Community

Type the trap community, which is the password sent with each trap to the 

SNMP manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

SNMP

Service Port

You may change the server port number for a service if needed, however you 

must use the same port number in order to use that service for remote 

management.

Service Access

Select the interface(s) through which a computer may access the Prestige using 

this service.