Справочник Пользователя для ZyXEL p-2602r-d1a

P-2602R/RL-DxA Quick Start Guide

3

1 DSL: Use the gray ADSL cable to connect the telephone jack or the DSL or MODEM jack on a splitter to 

this port.

2 LINE: Use the green PSTN line cable to connect the telephone jack or the TEL or PHONE jack on a splitter to 

this port.

Note: When the P-2602R/RL-DxA does not have power, only the phone connected to the 

PHONE 2 port can be used for making calls. Ensure you know which phone this is, so 
that in case of emergency you can make outgoing calls. 

3 ETHERNET: Use an Ethernet cable to connect a computer to this port for initial configuration and/or 

Internet access.

4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2602RL-DxA) to 

connect your telephones to these ports. If you only have one telephone, you should use port 1.

5 POWER: Use the power adaptor provided with your P-2602RL-DxA to connect an appropriate power 

source to this socket.

Note: If you are using T-ISDN (UR-2), connect the green wire to a TAE connector before connecting it 

to a telephone wall jack or the telephone splitter's TEL or PHONE jack.