Справочник Пользователя для ZyXEL p-2602r-d1a
P-2602R/RL-DxA Series User’s Guide
Chapter 1 Getting To Know the ZyXEL Device
43
The following table describes your device’s LEDs.
Refer to the Quick Start Guide for information on hardware connections.
Table 3 LEDs
LED
COLOR
STATUS
DESCRIPTION
POWER
Green
On
Your device is receiving power and functioning properly.
Blinking
Your device is rebooting and performing a self-test.
Red
On
Your device is not receiving enough power.
None
Off
Your device is not ready or has malfunctioned.
ETHERNET
Green
On
Your device has a successful Ethernet connection.
Blinking
The ZyXEL Device is sending/receiving data.
None
Off
The LAN is not connected.
DSL
Green
On
Your device has a physical connection with the ISP.
Blinking
Your device is initializing the DSL line.
None
Off
The DSL link is down.
INTERNET
Green
On
Your device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned
Your device has a WAN IP address (either static or assigned
by a DHCP server), PPP negotiation was successfully
completed (if used) and the DSL connection is up.
Blinking
Your device is sending or receiving IP traffic.
Red
On
Your device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no
PPPoE response, PPPoE authentication failed).
None
Off
Your device does not have an IP connection
PHONE 1, 2
Green
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off
of the hook or there is an incoming call.
Orange
On
A SIP account is registered for the phone port and there is a
voice message in the corresponding SIP account.
Blinking
A telephone connected to the phone port has its receiver off
of the hook or there is voice message in the corresponding
SIP account.
None
Off
The phone port does not have a SIP account registered.