Руководство Пользователя для ZyXEL P-663H-51
Chapter 5 WAN Setup
P-663H-51 User’s Guide
54
5.4 WAN ATM PVC Configuration and QoS
Click Advanced Setup > WAN > Add (or Edit) to open the following screen. Use this screen
to configure ATM PVC settings and enable or disable QoS. The screen differs by the service
category.
to configure ATM PVC settings and enable or disable QoS. The screen differs by the service
category.
See
for more information.
Figure 23 Advanced Setup > WAN > Add
Interface
This field displays the name of the WAN connection, followed by the DSL port,
Virtual Path Identifier, and Virtual Channel Identifier.
Virtual Path Identifier, and Virtual Channel Identifier.
Protocol
This is the type of network protocol the WAN interface is using for IP over
Ethernet.
Ethernet.
IGMP
This is whether or not the WAN connection is using IGMP multicast (if available).
QoS
This is whether or not packet level QoS is enabled for the WAN connection.
State
This is whether or the WAN connection is enabled.
Remove
To remove a WAN connection, select its Remove check box and click the
Remove button.
Remove button.
Edit
Click this button to go to a screen where you can modify the WAN connections
settings.
settings.
Add
Click this button to go to a screen where you can configure settings for a new
WAN connection.
WAN connection.
Remove
To remove a WAN connection, select its Remove check box and click the
Remove button.
Remove button.
Save/Reboot
Click this button to apply and save your changes. The ZyXEL Device restarts.
Table 11 Advanced Setup > WAN (continued)
LABEL
DESCRIPTION