Руководство Пользователя для ZyXEL P-663H-51
Chapter 5 WAN Setup
P-663H-51 User’s Guide
57
5.6.1 LLC-based Encapsulation
In this case one VC carries multiple protocols with protocol identifying information being
contained in each packet header. Despite the extra bandwidth and processing overhead, this
method may be advantageous if it is not practical to have a separate VC for each carried
protocol, for example, if charging heavily depends on the number of simultaneous VCs.
contained in each packet header. Despite the extra bandwidth and processing overhead, this
method may be advantageous if it is not practical to have a separate VC for each carried
protocol, for example, if charging heavily depends on the number of simultaneous VCs.
5.6.2 VC-based Encapsulation
In this case, by prior mutual agreement, each protocol is assigned to a specific virtual circuit;
for example, VC1 carries IP, etc. VC-based multiplexing may be dominant in environments
where dynamic creation of large numbers of ATM VCs is fast and economical.
for example, VC1 carries IP, etc. VC-based multiplexing may be dominant in environments
where dynamic creation of large numbers of ATM VCs is fast and economical.
5.7 WAN Connection Type and Encapsulation Mode
This is the second WAN setup add (or edit) screen. Use this screen to configure WAN
connection type and encapsulation mode.
connection type and encapsulation mode.
Figure 24 Advanced Setup > WAN > Add (2)
The following table describes the labels in this screen.
Table 13 Advanced Setup > WAN
LABEL
DESCRIPTION
Connection Type
Select the type of network protocol the ISP uses for IP over Ethernet.
Encapsulation
Mode
Mode
Select the encapsulation mode that your ISP uses.
Back
Click this to return to the previous screen.
Next
Click this to go to the following screen.