Руководство Пользователя для ZyXEL nbg-4615
Chapter 28 Maintenance
NBG4615 User’s Guide
233
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
NBG4615 IP address (192.168.1.2). See
NBG4615 IP address (192.168.1.2). See
for details on
how to set up your computer’s IP address.
28.8 Reset/Restart Screen
System restart allows you to reboot the NBG4615 without turning the power off.
Click Maintenance > Reset/Restart to open the following screen.
Figure 139 Maintenance > Reset/Restart
Click Restart to have the NBG4615 reboot. This does not affect the NBG4615's
configuration.
configuration.
Upload
Click Upload to begin the upload process.
Note: Do not turn off the NBG4615 while configuration file upload is in
progress.
After you see a “configuration upload successful” screen, you must then
wait one minute before logging into the NBG4615 again. The NBG4615
automatically restarts in this time causing a temporary network
disconnect.
wait one minute before logging into the NBG4615 again. The NBG4615
automatically restarts in this time causing a temporary network
disconnect.
If you see an error screen, click Back to return to the Backup/Restore
screen.
screen.
Reset
Pressing the Reset button in this section clears all user-entered
configuration information and returns the NBG4615 to its factory defaults.
configuration information and returns the NBG4615 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your NBG4615. Refer to the chapter about introducing the Web
Configurator for more information on the RESET button.
defaults of your NBG4615. Refer to the chapter about introducing the Web
Configurator for more information on the RESET button.
Table 85 Maintenance > Backup/Restore (continued)
LABEL
DESCRIPTION