Справочник Пользователя для ZyXEL p-2802h-i1

Chapter 2 Introducing the Web Configurator

P-2802H(W)(L)-I Series User’s Guide

Firewall

General

Use this screen to activate/deactivate the firewall and the default action to 

take on network traffic going in specific directions. 

Rules

This screen shows a summary of the firewall rules, and allows you to edit/

add a firewall rule.

Threshold

Use this screen to configure the thresholds for determining when to drop 

sessions that do not become fully established.

Content Filter

Keyword

Use this screen to block access to web sites containing certain keywords in 

the URL.

Schedule

Use this screen to set the days and times for your device to perform content 

filtering.

Trusted

Use this screen to exclude a range of users on the LAN from content 

filtering.

VPN

Setup

Use this screen to configure each VPN tunnel.

Monitor

Use this screen to look at the current status of each VPN tunnel.

VPN Global 

Setting

Use this screen to allow NetBIOS traffic through VPN tunnels.

Certificates

My Certificates

Use this screen to generate and export self-signed certificates or 

certification requests and import the ZyXEL Device’s CA-signed certificates. 

Trusted CAs

Use this screen to save CA certificates to the ZyXEL Device.

Trusted Remote 

Hosts

Use this screen to import self-signed certificates.

Directory 

Servers

Use this screen to configure a list of addresses of directory servers (that 

contain lists of valid and revoked certificates).

Advanced

Static Route

IP Static Route

Use this screen to configure IP static routes to tell your device about 

networks beyond the directly connected remote nodes.

QoS

General

Use this screen to enable QoS and traffic prioritizing, and configure 

bandwidth management on the WAN.

Class Setup

Use this screen to define a classifier.

Monitor

Use this screen to view each queue’s statictics.

Dynamic DNS

This screen allows you to use a static hostname alias for a dynamic IP 

address.

Remote MGMT WWW

Use this screen to configure through which interface(s) and from which IP 

address(es) users can use HTTP to manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and from which IP 

address(es) users can use Telnet to manage the ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and from which IP 

address(es) users can use FTP to access the ZyXEL Device.

SNMP

Use this screen to configure your ZyXEL Device’s settings for Simple 

Network Management Protocol management.

DNS

Use this screen to configure through which interface(s) and from which IP 

address(es) users can send DNS queries to the ZyXEL Device.

ICMP

Use this screen to set whether or not your device will respond to pings and 

probes for services that you have not made available.

UPnP

General

Use this screen to turn UPnP on or off.

Table 5   Navigation Panel Summary