Руководство Пользователя для ZyXEL nbg-334w

 Chapter 22 Sys Op Mode

NBG334W User’s Guide

Figure 120   Maintenance > Sys Op Mode > General: AP 

• In AP Mode all Ethernet ports have the same IP address. 
• All ports on the rear panel of the device are LAN ports, including the port labeled WAN. 

There is no WAN port.

• The DHCP server on your device is disabled. In AP mode there must be a device with a 

DHCP server on your network such as a router or gateway which can allocate IP 
addresses.

The IP address of the device on the local network is set to 192.168.1.1.
The following table describes the labels in the General screen.

Table 94   Maintenance > Sys OP Mode > General 

"

If you select the incorrect System Operation Mode you cannot connect to the 
Internet.

System Operation Mode

Router 

Select Router if your device routes traffic between a local network and another 

network such as the Internet. This mode offers services such as a firewall or 

bandwidth management.

Access Point

Select Access Point if your device bridges traffic between clients on the same 

network.

Apply

Click Apply to save your settings.

Reset

Click Reset to return your settings to the default (Router)