Руководство Пользователя для ZyXEL nbg-5715
Chapter 20 Remote Management
NBG5715 User’s Guide
154
20.5 Telnet Screen
To change your NBG5715’s remote management settings, click Management > Remote MGMT >
Telnet to open the Telnet screen.
Telnet to open the Telnet screen.
Figure 91
Management > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 66
Management > Remote MGMT > Telnet
LABEL
DESCRIPTION
Port
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
you must use the same port number in order to use that service for
remote management.
Access Status
Select the interface(s) through which a computer may access the
NBG5715 using this service.
NBG5715 using this service.
Secured Client IP
Address
Address
Select All to allow all computes to access the NBG5715.
Otherwise, check Selected and specify the IP address of the computer
that can access the NBG5715.
that can access the NBG5715.
Apply
Click Apply to save your customized settings and exit this screen.
Cancel
Click Cancel to begin configuring this screen afresh.