Руководство Пользователя для ZyXEL nbg-5715

Chapter 11 Wireless LAN

NBG5715 User’s Guide

The following table describes the wireless LAN security labels in this screen.

Select WPA-PSK or WPA2-PSK from the Security Mode list.

Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK

Network > Wireless LAN 2.4G/5G > Security: Static WEP

Security Mode

Select Static WEP to enable data encryption.

PassPhrase

Enter a Passphrase (up to 26 printable characters) and click Generate. 

A passphrase functions like a password. In WEP security mode, it is further 
converted by the NBG5715 into a complicated string that is referred to as the 
“key”. This key is requested from all devices wishing to connect to a wireless 
network.

WEP Encryption

Select 64-bits or 128-bits.

This dictates the length of the security key that the network is going to use.

Authentication 
Method

Select Auto or Shared Key from the drop-down list box.

This field specifies whether the wireless clients have to provide the WEP key to 
login to the wireless client. Keep this setting at Auto unless you want to force a 
key verification before communication between the wireless client and the 
NBG5715 occurs. 

Select Shared Key to force the clients to provide the WEP key prior to 
communication. 

ASCII

Select this option in order to enter ASCII characters as WEP key. 

Hex

Select this option in order to enter hexadecimal characters as a WEP key. 

The preceding "0x", that identifies a hexadecimal key, is entered automatically.

Key 1 to Key 4

The WEP keys are used to encrypt data. Both the NBG5715 and the wireless 
stations must use the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal 
characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal 
characters ("0-9", "A-F"). 

You must configure at least one key, only one key can be activated at any one 
time. The default key is key 1.

Apply

Click Apply to save your changes back to the NBG5715.

Cancel

Click Cancel to reload the previous configuration for this screen.