Руководство По Работе для Sharp MX-5500N

• Copying begins and the scanned document image is saved 

to the hard drive.
The selected copy settings are also saved.

• To prevent accidental saving of the document, the message 

"The scanned data is stored in the quick file folder." appears 
for 6 seconds (default setting) after the [START] key is 
pressed.
The message display time can be changed using "Message 
Time Setting" in the system settings (administrator).

• If you inserted the original pages in the document feeder 

tray, all pages are scanned.

• If you placed the original on the document glass, scan each 

page one page at a time.
When scanning of one page finishes, replace it with the next 
page and press the same [START] key that you pressed 
initially.
Repeat until all pages have been scanned and then press 
the [Read-End] key.

To cancel scanning...
Press the [STOP] key (

).

When a file is stored using Quick File, the following user name and file name are automatically assigned to the file.

User Name: User Unknown
File Name: Mode_Month-Day-Year_Hour-Minute-Second

(Example: Copy_04012006_112030AM)

Stored to:

Quick File Folder

When user authentication is used, the user name that was used for login is automatically selected.
Only the file name and location of a file stored in the Quick File Folder can be changed.

To cancel Quick File...
Touch the [Quick File] key in the screen of step 2 so that it is no longer highlighted.