Руководство По Подключению для Sharp lc-40c37u

Disable

Enable

PCM

Dolby Digital

Press MENU to exit.

Power control setting allows you to save energy.

No signal off
When set to “Enable”, the power will automatically shut 
down if there is no signal for 15 minutes.

You can output digital audio to an AV amplifier or 
similar device whose DIGITAL AUDIO INPUT terminal 
is connected to the DIGITAL AUDIO OUTPUT terminal 
on the TV. Please select an audio output format 
compatible with the audio format of the program you 
are watching and the equipment connected.

• “Disable” is the factory preset value.
• When a TV program finishes, this function may not operate.

• “Disable” is the factory preset value.

Press

a/b to select “PCM” or “Dolby 

Digital”, and then press ENTER.

Press MENU and the MENU screen displays.

Press

c/d to select “Power Control”.

Press

a/b to select “No Signal Off”, and 

then press ENTER.

Press

c/d to select “Enable”, and then 

press ENTER.

• Five minutes before the power shuts down, the 

remaining time displays every minute.

No operation off
When set to “Enable”, the power will automatically shut 
down if there is no operation for 3 hours.

Repeat steps 1 and 2 in No signal off.

Press

a/b to select “No Operation Off”, and 

then press ENTER.

Press

c/d to select “Enable”, and then 

press ENTER.

• Five minutes before the power shuts down, the 

remaining time displays every minute.

This setting allows you to optimize the settings of 
Digital broadcasting.

Press MENU and the MENU screen displays.

Press

c/d to select “Digital Setup”.

Press 

a/b to select “Audio Setup”, and then 

press ENTER.

The optical output terminal outputs 
audio signal in PCM form. If your 
digital audio system does not support 
Dolby Digital, select “PCM”. 

The optical output terminal outputs 
audio signal in Dolby Digital form. 
It reproduces sound from surround 
program of digital.

Press MENU to exit.

Press MENU to exit.