Руководство Пользователя для SVP cdc-1530
5
Loading the Batteries and SD Card
This camera uses 2 AA batteries. The batteries and SD card share the same compartment
and door
.
1. Slide the battery/SD card door in the
direction of the arrow, then lift to open.
2. Load the included batteries
into the battery compartment. (a)
3. Insert the SD card into the slot. (b)
4. Close the battery/SD card door.
direction of the arrow, then lift to open.
2. Load the included batteries
into the battery compartment. (a)
3. Insert the SD card into the slot. (b)
4. Close the battery/SD card door.
CAUTION!
1. Use only the specified battery for use with this camera.
Other power sources may cause fire.
2. To improve battery performance, replace all installed
batteries at the same time and keep batter way from
heat.
3. To dispose off batteries, please refer to index of battery
manufacturer.
4. Do not mix battery types or it may cause a fire or
explosion. Use only one battery type at one time
5. Batteries should be inserted in the battery compartment
with the "+" and "-" sides facing correctly.
Other power sources may cause fire.
2. To improve battery performance, replace all installed
batteries at the same time and keep batter way from
heat.
3. To dispose off batteries, please refer to index of battery
manufacturer.
4. Do not mix battery types or it may cause a fire or
explosion. Use only one battery type at one time
5. Batteries should be inserted in the battery compartment
with the "+" and "-" sides facing correctly.
1. Upon loading new batteries, users will need to reset
their Basic Settings
2. Do not open the battery/SD card door or remove the
batteries when the camera is in its ON status. Only
remove the batteries and SD card when the camera is
not in use, or in its OFF status.
3. If you do not plan on using the camera for a long period
of time, please remove the batteries and SD card.
their Basic Settings
2. Do not open the battery/SD card door or remove the
batteries when the camera is in its ON status. Only
remove the batteries and SD card when the camera is
not in use, or in its OFF status.
3. If you do not plan on using the camera for a long period
of time, please remove the batteries and SD card.
NOTE:
a
b