Краткое Руководство По Установке для Plantronics S12
QUICK START USER GUIDE
T
ELEPHONE
H
EADSET
S
YSTEM
S12
The S12 Telephone Headset System is designed to add a
headset to an existing telephone.
headset to an existing telephone.
The S12 System provides precise levels of listening and talking
comfort and crystal clear voice quality.
comfort and crystal clear voice quality.
The S12 System is not designed to work on telephones that
have the dial pad in the handset or on cordless telephones.
have the dial pad in the handset or on cordless telephones.
This user guide provides the following steps to quickly set up
and use your headset system.
and use your headset system.
1.
Identify the Components
2.
Attach to Telephone
3.
Set Amplifier Compatibility Switch
4.
Make a Test Call
The other side has more details:
■
Examine other features
■
Troubleshooting
■
Technical Support Center Information
■
FCC Information
■
Parts and Accessories
■
Warranty and Service
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
for cleaning.
4. Do not locate this product near water, for example, near
a bathtub, sink, or laundry tub, in a wet basement or near a
swimming pool.
swimming pool.
5. This product should never be placed near or over a radiator or
heat register. It should not be placed in a built-in installation
unless proper ventilation is provided.
unless proper ventilation is provided.
6. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your dealer or
local power company.
the type of power supply to your home, consult your dealer or
local power company.
7. Do not allow anything to rest on the power cord. Do not locate
this product where persons walking on it will damage the cord.
8. Do not overload outlets and extension cords as this can result
in risk of fire or electric shock.
9. Never disassemble or push objects of any kind into the product
as this may short out parts which could result in a fire or
electric shock. Never spill liquid of any kind on the product.
electric shock. Never spill liquid of any kind on the product.
10. Use caution when installing or modifying telephone lines.
11. This product requires an approved power supply such as the
11. This product requires an approved power supply such as the
one supplied by a Listed Class 2 Direct Plug-In Power Unit
rated 9VDC 350mA. Plantronics Part No. 45671-01, rated at
an input voltage of 120 VAC, 60Hz and 6 W.
rated 9VDC 350mA. Plantronics Part No. 45671-01, rated at
an input voltage of 120 VAC, 60Hz and 6 W.
12. This product requires AC power in order to operate. In order
to have phone service during a power outage, have another
telephone available that is powered only by the telephone line.
telephone available that is powered only by the telephone line.
13. Keep all product cords and cables away from operating
machinery.
14. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
from lightning.
15. Do not use the telephone to report a gas leak in the vicinity of
the leak.
SAVE THESE INSTRUCTIONS
W
ELCOME
21
2.1
Unplug your telephone
handset cord from the
telephone base.
telephone base.
2.2
Plug your telephone
handset cord into the S12
amplifier handset jack.
amplifier handset jack.
2.3
Connect the cord
between the telephone base
jack on the S12 amplifier and
your telephone base.
jack on the S12 amplifier and
your telephone base.
2.4
Plug the headset plug into
the headset jack.
2.5
Route the headset cord through the cable management
channel on the bottom of the amplifier (not shown).
2.6
Snap in the headset holder (not shown).
2.7
Plug the AC power adapter into the AC power adapter jack
and plug into a standard
AC wall output.
AC wall output.
4.1
Verify that the mute button is off.
The mute indicator should not be illuminated
4.2
Remove the phone handset from the
cradle and place on your desk.
1.
If you do not hear a dial tone in the
headset, press the headset button.
The headset indicator is on.
4.3
Use your telephone keypad to call a
friend or colleague.
4.4
Adjust the listen volume using the listen
volume control.
4.5
If your friend cannot hear you, or you
hear a buzz or hum, try changing the
compatibility slide switch.
compatibility slide switch.
4.6
Adjust how loud you sound to the other
party by adjusting the speak volume control.
4.7
If you sound too loud, move the speak
volume master switch to its lower setting and
adjust the speak volume control.
adjust the speak volume control.
4.8
After completing the call, return the
handset to its cradle.
3.1
Put on headset and press the
headset button.
The headset indicator should be
on (green).
on (green).
3.2
Lift the telephone’s handset off
the cradle and place it on your
desk.
desk.
3.3
If you hear a clear dial tone,
you can proceed to Step 4.
3.4
If you don’t hear a dial tone,
adjust the compatibility slide switch
following this process:
following this process:
1.
Slide the compatibility slide
switch until you hear a clear dial
tone.
tone.
There may be multiple settings
with a dial tone. Select the one
that sounds most like the handset
of your phone.
with a dial tone. Select the one
that sounds most like the handset
of your phone.
Experimenting with various switch
settings will not harm the amplifier
or your telephone.
settings will not harm the amplifier
or your telephone.
2.1
4.5
4.6
4.7
1
Adjustable
Headband
2
Headset
Assembly
3
Clothing Clip
4
Headset Plug
5
Microphone
Boom
Boom
6
Ear Cushion
Assembly
Assembly
7
Earloop
8
Pivot Ball Ring
9
Firefly
TM
In-Use
Indicator
Over-the-Head............converts to............Over-the-Ear
3.2
3.4
4.2
1
3.1
2.3
2.4
2.2
Attach
Amplifier to
Telephone
Amplifier to
Telephone
2
Set Amplifier
Compatibility
Slide Switch
Compatibility
Slide Switch
3
Make a
Test Call
Test Call
4
Identify the
Components
Components
1
S12
Q
UICK
S
TART
G
UIDE
4.1
4.4
2.7
10
Headset Holder
11
Compatibility Slide
Switch
Switch
12
S12 Amplifier
13
Headset Indicator
(Green)
(Green)
14
Power Indicator
(Green)
(Green)
15
Mute Indicator (Red)
16
Listen Volume Control
17
Mute Button
18
Headset/Handset
Button
Button
19
Speak Volume Control
20
Speak Volume Master
(Hi, Low) Switch
(Hi, Low) Switch
21
Cord (Phone to
Amplifier)
Amplifier)
22
AC Power Adapter
23
AC Power
Adapter Jack
Adapter Jack
24
Headset Jack
25
Handset Jack
26
Telephone Base Jack
Back View
Right Side View
Left Side View
Over-the-Head
Over-the-Ear
10
13