Руководство Пользователя для Crown cts1200

Yellow LED, one per channel pair, 
illumi nates when the channel pair’s Mode 
Switch is set to the “Bridge” position. If 
Mode switch is changed while amplifi er is 
powered up, Bridge LED will fl ash, 
indicat ing that the amplifi er must be 
powered off and on to reset the Mode. See 
Section 6.9.

Green LED, one per channel, illuminates 
when the channel is initialized and ready to 
produce audio output.

 

Green LED, one per channel, illuminates to 
indicate the presence of input signals 
above –40 dBu.

 

Red LED, one per channel, illuminates 
when the THD of the channel’s output 
sig nal rises to a level typically considered 
as the onset of audible clipping. The Clip 
Indicator also will illuminate during 
Ther mal Level Control (TLC) or input 
overload.

 

Red LED, one per channel, fl ashes when 
the channel has shut down due to thermal 
stress or overload. If the power supply 
goes into thermal overload, all channel 
LEDs will fl ash.

 

Red LED, one per channel, illuminates 
when the amplifi er output channel has 
stopped operating.

 

Front-to-rear forced airfl ow.

 

Yellow LED indicates IQ Loop data activity 
(if the amplifi er is equipped with an IQ-MC 
module, and connected to an IQ Loop).

 

Blue LED indicates amplifi er has been 
turned on and AC power is available. 
Indi cator also fl ashes if the amplifi er shuts 
off due to an under/over-voltage condition 
on the AC mains.

 

Amplifi er is on when the switch is in the IN 
position.