Руководство Пользователя для Amana AFD2535DES

25

• Plastic tubing was used to complete

water connection.

• Improper water valve was installed.

• Water pressure is low.

• Freezer temperature is too high.

• Water pressure is low.

• Improper water valve was installed.

• Copper tubing has kinks.

• Water filter is clogged or needs to be

changed.

• Ice maker arm is in OFF position.

• Household water supply is not

reaching water valve.

• Copper tubing has kinks.

• Water pressure is too low.

• Check freezer temperature.

• The manufacturer recommends using copper tubing

for installation. Plastic is less durable and can cause
leakage. The manufacturer is not responsible for
property damage due to improper installation
or water connection.

• Check water connection procedure (see pages 6-7).

Self-piercing and 

3

⁄

16

” saddle valves cause low water

pressure and may clog the line over time. The
manufacturer is not responsible for property
damage due to improper installation or water
connection.

• Water pressure must be between 35 to 100 pounds

per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refrigerators with water filters.

• Adjust freezer control (see page 8). Freezer is 

recommended to be approximately 0° F (-17° C).

• Water pressure must be between 35 to 100 pounds

per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refrigerators with water filters.

• Check water connection procedure in your

Installation Instructions.  Self-piercing and 

3

⁄

16

”

saddle valves cause low water pressure and may
clog the line over time. The manufacturer is not
responsible for property damage due to
improper installation or water connection.
Open water valve completely and check for leaks. 

• Turn off water supply and remove kinks.  If kinks

cannot be removed, replace tubing.

• Change water filter (see page 13).

• Confirm ice maker arm is down. SeeeAutomatic  Ice

Maker, page 12.

• See Connecting the Water Supply, pages 6-7.

• Turn off water supply and remove kinks. If kinks

cannot be removed, replace tubing. 

• Water pressure must be between 35 to 100 pounds

per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.

• See Temperature Controls, page 8. Freezer

temperature should be between 0° to 2° F (-18° to 
-17° C) to produce ice.