Руководство Пользователя для CTX pv411s

7

VGA Cable

AC Power Cord

AC/DC Power

Adapter

"

Connecting the Display

To setup this display, please refer to the following figure and procedures.

1. Be sure all equipment is off.

2. Connect the VGA signal cable from display input connector to the 15-pin

connector of  your host computer and tighten the screws.

3. Connect the DC power cord to the power connector; plug one end of the

AC power cord into the power adapter, and then the other end into an
electrical outlet.

To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1024 x 768 resolution and make sure timing
of the display mode is compatible with the LCD display. We have
listed the “Compatibility Modes” of this LCD display in appendices
for your reference.