Справочник Пользователя для Boston Acoustics recepter-p

ENTERING STATIONS INTO PRESET MEMORY

Manually tune to desired station.

Press and hold the 

button for 1 second until you hear 

a beep confirmation.

The display will show the preset station number in the upper left 

corner of the display.

Stations will store in the order that they were entered into 

memory, regardless of whether they are FM or AM stations.

LISTENING TO PRESET STATIONS 

Push     

button until the word “Presets” is displayed.

Turn the tuning knob to the preset you wish to listen to.

CLEARING STATIONS FROM PRESET MEMORY

Push the 

button to engage Presets mode.

Turn the tuning knob to the preset you wish to clear.

Press and hold the 

button for 1 second until you hear 

a beep confirmation. When a station is cleared from memory, the 

Radio will mute until the tuning knob is turned again.

Holding the 

button for 10 seconds will clear 

ALL the preset stations. You will hear three quick beeps to confirm

an “all clear” operation.

DISPLAY MODE (STATION FREQUENCY/CLOCK TIME) 
WHEN POWER IS ON

The Radio normally displays the station frequency when the power is

on. To recall the clock time:

To recall the clock time, tap the  

button. The time will be 

displayed for five seconds

To change the default display mode from station frequency to 

clock time (or vice versa), press and hold the 

button 

until you hear a beep confirmation (about three seconds).

When power is off, the Radio always displays the current clock 

time, even if the default display mode when the power is on is 

the station frequency.

BRIGHT/DIM DISPLAY MODE

The bright display mode is the default setting.

Push the      button to change the display from bright 

to dim; push again to change it back.

SETTING THE WAKE-UP ALARM

Press the          (or 

) button repeatedly to choose the 

desired alarm mode—one press for music, two presses for buzzer,

three presses for music + buzzer. 

Pressing the 

button a fourth time will disable the alarm. The display will indicate

if an alarm is set and its mode of operation. In the music + 

buzzer mode, the Radio plays for 5 minutes, turns off, and then

the buzzer comes on.

Press the

button above the

(or 

) button. 

The time display will flash. 

While the time display is flashing, turn the tuning knob to the 

desired wake-up time. 

PM is indicated on display; AM

has no indication.

DISPLAYING THE WAKE-UP ALARM TIME

When an alarm is set, tap the         button above the appropriate 

or 

button to check the respective alarm time set-

ting. The alarm time will flash in the display for 5 seconds, then

the display will revert to its normal readout (either current clock 

time or radio frequency if the Radio power is on, or current 

clock time if the Radio power is off). 

TURNING OFF THE ALARM WHEN IT IS SOUNDING

To turn off the alarm, press the 

button on either 

the top or front of the Radio. The alarm will remain set to go off 

at the same time the next day.

To disable the alarm completely, press the 

(or 

) 

button repeatedly until the “Alarm” indicator is no longer visible in 

the display.

USING THE SNOOZE FUNCTION

When the alarm sounds, push the 

button once 

to silence the alarm for 10 minutes.

If the 

button is pushed again within 3 seconds of 

the first push, 5 minutes will be added to snooze time, up to a 

maximum of 60 minutes. Example: If the button is pushed rapidly 

three times, the Radio will go into snooze mode for 20 minutes 

(10 + 5 + 5 minutes).

Once the Radio is in snooze mode, tapping the 

button will display the remaining snooze time, counting down. The

display will then revert to normal after 5 seconds.

USING THE SLEEP FUNCTION

When listening to the Radio, this function turns the Radio off automat-

ically after a predetermined time.

When the Radio is playing normally (no alarm is sounding), hold 

the

button down for 1 second.

The word 

is shown in the display, and the time 60:00 is 

shown temporarily.

Each additional press of the 

button will reduce the 

remaining sleep time in 10-minute increments, to the nearest 10 

minutes. Example: If there are 59:48 minutes remaining in sleep,

pressing the button once will reduce the sleep time to 50 minutes,

twice will reduce it to 40 minutes, etc.

DISPLAYING THE REMAINING SLEEP TIME

While the Radio is in sleep mode, press the 

button 

once. The remaining sleep time will be temporarily shown in the 

display, then the display will revert to its normal readout (either 

current clock time or radio frequency, depending on which has 

been selected). 

dim

Alarm 
    1

On/off

On/off

store preset

Snooze / sleep

Snooze / sleep

Display

preset

clear

AM>FM>Presets

Snooze / sleep