Справочник Пользователя для Brother FAX-8070P

I cannot print from my 
application software.

Make sure the Windows

®

 printer driver is installed and you select it 

in your application software.

“MFC Connect Failure”

If the machine is not connected to your PC and you have loaded the 
Brother software, the PC will show “MFC Connect Failure” each 
time you restart Windows

®

. You can ignore this message or you can 

turn it off by deselect the AutoLoad PopUp check box in the Brother 
Control Center chapter. (See How to Turn Off AutoLoad, page 78.) 

The machine does not load 
paper. The LCD shows 
CHECK PAPER or PAPER 
JAM

Check to see if the CHECK PAPER or PAPER JAM message 
appears on the LCD. If so, the Multi-purpose Sheet Feeder may be 
out of paper. If it is empty, load a new stack of paper into the feeder 
and then press Fax Start. If there is paper in the Multi-purpose 
Sheet Feeder, make sure it is straight. If the paper is curled, you 
should straighten it. Sometimes it is helpful to remove the paper, 
turn the stack over and put it back into the Multi-purpose Sheet 
Feeder. Reduce the amount of paper in the Multi-purpose Sheet 
Feeder, then try again.

How can I clear paper jams?

Vertical streaks appear in 
copies

Sometimes you may see vertical streaks on your copies. Either the 
scanner or the primary corona wire for printing is dirty. Clean them 
both.

Printouts are too dark or light Adjust the print conditions by setting the Print Density function, It 

has been factory set to the middle position. (See Setting the Print 
Density, page 30.)

Printed pages contain white 
stripes.

You may fix this by wiping the scanner windows with a clean soft 
cloth. (See Regular Maintenance, page 130 and Cleaning the Drum 
Unit, page 131.) If you still see white stripes or faint images and the 
display shows CHANGE DRUM SOON, replace the drum unit 
with a new one.