Справочник Пользователя для Brother FAX-8070P

 

You might choose to connect an additional answering machine. When you have an 

 

 TAD 

on the same telephone line as the machine, the TAD answers all calls. The machine “listens” for fax 
calling (CNG) tones. If it hears them, the machine takes over the call and receives the fax. If it 
doesn’t hear the CNG tones, the machine will not answer the call, and messages can be left on the 
TAD by callers in the normal way.

The TAD must answer within a maximum of four rings. However, we recommend two rings as the 
TAD setting. The machine cannot hear CNG tones until the TAD has answered the call, and with 
four rings there are only 8–10 seconds of CNG tones left for the fax “handshake.” Make sure you 
carefully follow instructions in this manual for recording your outgoing message. Do not use a “toll-
saver” ring setting on the TAD.

 

You may connect an external TAD to the machine, as shown below.

 

Set your external TAD to two rings or less.

 

Record the outgoing message (see next page).

 

Set the TAD to answer calls.

 

Set the Receive Mode to 

 

 by pressing 

 

.