Справочник Пользователя для Brother FAX-8070P

You can scan up to 50 messages into the fax memory, even while the machine is receiving or sending 
another fax (from the memory). You can set temporary settings for each fax you’re scanning, except 
Timer and Polling.

If you get a OUT OF MEMORY message while scanning the first page of a fax, press Stop/Exit 
to cancel the scan. If you get a OUT OF MEMORY message while scanning in a subsequent page, 
you will have the option to press Fax Start to transmit the pages scanned so far, or to press 
Stop/Exit to cancel the operation.

Insert the document face down in the ADF.

Enter the fax number.

Press Fax Start. The machine starts scanning the document and the screen displays the job 
number (#XXX) of the fax, and how much memory is available. When the machine starts 
dialling you can immediately repeat Steps 1 through 3 for the next fax.

When memory is full, the machine cannot continue to scan documents into memory before sending. 
However, you can turn on REAL TIME TX. Then place the documents in the ADF and enter the 
fax number. As soon as the phone line is free, the machine starts dialling and sending the fax.

Insert the document face down in the ADF.

Press Menu/Set, 2, 2, 5.

To change the default setting, press 

 or 

 to select ON (or OFF) and press Menu/Set. 

Go to Step 6—OR—For the next fax transmission only, press 

 or 

 to select NEXT FAX 

ONLY.

Press Menu/Set.

For the next fax only, press 

 or 

 to select ON (or OFF) and press Menu/Set.

Press 1 if you want to select additional settings. The display returns to the SETUP SEND 
menu—OR—Press 2 if you have finished choosing settings and go to Step 7.

If you switched ON Real Time Transmission for the next fax only, enter the fax number and 
press Fax Start.