Справочник Пользователя для Brother FAX-8070P

You can cancel a job while you are scanning it into memory by pressing Stop/Exit. Eject the 
document by pressing Stop/Exit again.

You can check or cancel a job that is waiting in memory.

If the machine is idle,

Press Menu/Set, 2, 6.

Any waiting jobs appear on the display. If nothing is waiting, the screen displays NO JOB 
WAITING.

If you have more than one job waiting, use 

 or 

 to select the job you want to cancel. 

Press Menu/Set when the screen displays your selection—OR—If you have only one job 
waiting, go to Step 3.

Press 1 to cancel—OR—Press 2 to exit without cancelling.

To cancel another job, return to Step 2.

Press Stop/Exit.

This feature allows you to prevent unauthorised access to the machine. When switched ON, Memory 
Security prohibits most functions. The following functions listed are available while Memory 
Security is switched ON.
■ Receiving faxes into memory [limited by Memory Capacity].
■ Scheduled Delayed Transmission*
■ Polling*
■ Fax Forwarding*
■ Remote Retrieval
* Provided it was set before Memory Security was switched ON.

You must use a password to switch Memory Security ON and OFF.

Press Menu/Set, 2, 0, 1.

Enter a 4-digit number as a password.

Press Menu/Set.

The screen prompts you to re-enter the password.

Re-enter the password and press Menu/Set.

Press 

 or 

 to choose SET SECURITY.

You can check which jobs are remaining in memory by following Steps 1 and 2 
above.

NEW PASSWD:XXXX

VERIFY:XXXX