Руководство По Установке для Electrolux EDW5505EPS

1.  Flush the water supply line to clear any foreign material before  

 

 

connecting to the dishwasher.  

2.    Make sure that there are no sharp bends or kinks to restrict the water 

flow.

3.    Insert the water line into the 90° elbow.  See Figure 15.

4.   Slide the ferrule against the elbow and secure with the  

compression nut.

  5.  Turn the water on to check for leaks.

  6.  Feed the dishwasher cable through the small hole in the junction box.

  7.  Replace the access cover.

The dishwasher is supplied with a 72”  long drain hose.

  1.    If a longer drain hose is required, add up to 48” of length for a total of 10 feet.  

The hose must not restrict the flow from the drain of the dishwasher to the 
house’s drain system.  The type of hose used should be consistent with the 
type and diameter installed on the dishwasher.  

  2.    Secure the drain hose to the air gap, water tee or disposer with clamps.

  3.    Make sure the drain hose is not kinked.

NOTE

NOTE

NOTE

1

2