Руководство Пользователя для Kärcher 1600 psi electric pressure washer w
– 2
never lie in water. Moreover,
the coupling may never lie on
the ground. The use of cable
reels that ensure that the sock-
ets are at least 60 mm above
the ground is recommended.
–
Unsuitable electrical exten-
sion cables can be hazard-
ous. Only use electrical ex-
tension cables outdoors
which have been approved
and labelled for this purpose
and have an adequate cable
cross-section.
–
The power cord must be
checked regularly for damag-
es, such as cracks or aging. If
damage is found, the cable
must be replaced before fur-
ther use.
–
When replacing couplings on
the power cord or extension
cable, the watertightness and
the mechanical resistance
must remain ensured.
–
Do not clean the appliance with
a water hose or high-pressure
water jet (danger of short cir-
cuits or other damage).
–
Do not operate the appliance
at temperatures below 0 °C.
–
Please observe the safety in-
structions of your water sup-
ply authority.
–
Please ensure that screw
connections of all hoses are
not leaky.
–
The high pressure hose must
not be damaged. A damaged
high pressure hose must be
replaced immediately. Only
hoses and joints recommend-
ed by the manufacturer may
be used. See Operating In-
structions Manual for Order
Number.
–
The appliance and its working
equipment must be checked
to ensure that it is in proper
working order and is operat-
ing safely prior to use.
The appliance must not be
used if a connecting line or
important parts of the appli-
ance, e.g. safety devices,
high-pressure hoses, spray
guns, are damaged.
–
Never draw in fluids contain-
ing solvents or undiluted ac-
ids and solvents! This in-
cludes petrol, paint thinner
and heating oil. The spray
mist thus generated is highly
inflammable, explosive and
poisonous. Do not use ace-
tone, undiluted acids and sol-
vents as they are aggressive
towards the materials from
which the appliance is made.
–
If the appliance is used in
hazardous areas (e.g. filling
stations) the corresponding
safety provisions must be ob-
served. It is not allowed to
use the appliance in hazard-
ous locations.
–
The appliance must be sitting
on an even, stable ground.
Water connection
Application
10
EN