Справочник Пользователя для Milan mil-sm808g
74
5-4-8. Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D)
for avoiding loops in switched networks. When STP is enabled it ensures
that only one path at a time is active between any two nodes on the network.
for avoiding loops in switched networks. When STP is enabled it ensures
that only one path at a time is active between any two nodes on the network.
Spanning-Tree Protocol can be enabled using web management’s switch
setting advanced item, and selecting enable Spanning-Tree protocol. By
default, spanning tree is disabled on the switch.
setting advanced item, and selecting enable Spanning-Tree protocol. By
default, spanning tree is disabled on the switch.
It is recommended that STP be enabled on all switches to ensure a single
active path on the network.
active path on the network.