Руководство По Подключению для PRIMERA autoprinter

 

This sheet describes the installation and use of the CD-R Business Card 

Adapter Kit for the Disc Publisher and the AutoPrinter (referred to 
hereafter as the “Publisher”). 

 

NOTE: The Business Card Adapter Kit is designed to work with the 

Publisher. This will not work with other CD Printers or Duplicators. 
 

SECTION I: INSTALLATION 

 
1.  Make sure that in this box you have the following items: 

 

•  CD Business Card/ Mini CD 80mm Input Bin 

•  “Hockey Rink” Card Input Bin 

•  Output Ring   

•  CD Business Card Tray Template Assembly  

•  Mini Disc 80mm and “Hockey Rink” Tray Template Assembly 

•  9 Sample Discs 

 

2.  Remove original 120mm Input Bin and place the appropriate Card/ 

Mini Disc Input Bin on the right side of the Publisher with the 

opening in the bin to the rear. 

  

 

 
 

 

 

 

 
 

 

 

Figure 1: Input Bins 

 

3.  Place Output Ring in the center of the Output Bin on the left side 

of the Duplicator as shown in Figure 3. 

 
 

 

4.  With the Front Cover of the Publisher closed, press the Cartridge 

Button. The Printer Tray will open. Open the Front Cover and 

install the appropriate Printer Tray Template in the Printer Tray 
as shown in Figure 3. The front of the Template has molded tabs 

that fit into locating slots found toward the front of the Printer 

Tray. When properly installed, the metal clamp moves forward to 

hold the card in place as the Printer Tray retracts into the printer.  
 

 

 

 
 

 

 

 

 

 
 

 

 

 
 

 

 

 
 

 

 

 

 

 

“Hockey Rink” Card Input Bin 

CD Business Card/ Mini CD 

Input Bin 

Rear Opening 

For Arm 

“Hockey Rink” and Business 

Card Template 

Mini Disc Template

Output 

Ring 

Input Bin

Printer Tray 

Template 

Front Cover

Cartridge 

Button