Руководство Пользователя для Slacker g2 - 2gb

If you are having any issues, please refer to these troubleshooting topics.   If you still have questions
after reviewing these topics, refer to 

.

First, you need to download and install the USB Station Refresher to install the drivers . You can
download this program by going to 

 and clicking on the Portable

Radio Tab. At the bottom of the Portable Radio section you will see the download button. 

If you already have installed the program but you still are being asked for the drivers, then you can
find them on your computer by browsing to the following folder C:\Program Files\Slacker\USB
Station Refresher\driver.  All of the needed drivers are located in that folder after the USB Station
Refresher has been installed. 

There are a number of applications that might be installed on a computer that will block the
Personal Radio Player from being able to connect properly such as Anti-Virus Programs, Windows
Defender, Firewalls, etc. If you are having problems connecting, then you will want to  disable these
types of programs temporarily. Once they are all disabled, then try connecting the Personal Radio
Player again. If it works, then turn the disabled programs on one at a time until you find the program
that is causing the problems. Once the program has been identified, then you may need to
configure it to allow "ICS" (Internet Connection Sharing) to work properly with the application.
Internet Connection Sharing is part of Windows XP and Windows Vista;  we use ICS to make a
connection to the Internet so we can refresh the Personal Radio Players. 

The most common cause of this problem is a network conflict. Built into Windows XP and Windows
Vista is a program called "ICS" or Internet Connection Sharing. The Personal Radio Players use
this program to access the Internet and connect to the Slacker servers. When you use this
program, it uses a network address of 192.168.0.1 for the connection. If you have another device
on your home network, such as a router or modem (DSL/Cable) that also uses this same address,
then it can cause a conflict. At this time, Microsoft does not allow us the ability to change the
address for Internet Connection Sharing. Therefore, in order to resolve the conflict, you would need
to consult the manual or manufacturers help on changing the IP address of the device causing the
conflict with this address. 

The Slacker G2 requires that the SSID be broadcast in order to connect to the Wi-Fi network. You
can consult your Router manual for assistance in setting up the router to broadcast the SSID.