Краткое Руководство По Установке для Garmin 710

1.  Plug the vehicle power cable into the power connector

on the right side of the cradle.

2.  Snap the cradle onto the suction cup arm.
3.  Clean and dry your windshield and the suction cup

with a lint-free cloth. Remove the clear plastic from the

suction cup. Place the suction cup on the windshield.

4.  Flip the lever back, toward the windshield.
5.  Fit the bottom of your nüvi into the cradle.
6.  Tilt the nüvi back until it snaps into place.
7.  Plug the other end of the vehicle power cable into

a power outlet in your vehicle. Your unit should turn

on automatically if it is plugged in and your vehicle is

running.

8.  If you are using a traffic receiver in Europe, secure the

traffic receiver’s antenna to the windshield using the

suction cups. (The traffic receiver is included in some

nüvi 710, 750T, 760, and 770 packages.)

WARNING: This product contains a non-user-replaceable lithium-ion battery. See the Important Safety and 

Product Information guide in the product box for important battery safety information.

Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota 

prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin 

dashboard or friction mounting options should be used. See the Important Safety and Product Information 

guide for more details.