Краткое Руководство По Установке для Garmin legend hcx

The Vista HCx or Summit HC has four recurring main pages and one 

that shows only with each start-up. The Legend HCx or Venture HC has 

three main pages. Press and release QUIT to cycle through the pages.

Compass Page—guides you to your destination.
Altimeter Page—tracks elevation and pressure. (Vista HCx and 

Summit HC only.)
Main Menu—contains advanced features and settings.

Satellite Page—appears only at start-up and shows the GPS receiver 

status, satellite locations, satellite signal strength, and the receiver’s 

current location.
Map Page—shows a detailed map of the area around your current 

location. 

Press down to ENTER. Move to the side or up or down to 

scroll, move the cursor, or increase or decrease values.

POWER/Backlight key—press and hold to turn       

the unit on or off. Press and release to adjust the       

backlighting, view the date or time, and view  

   

the battery capacity.
  
IN/OUT Zoom keys—from the Map page, press to 

zoom in or out. From any other page, press to scroll up 

or down a list.

MENU/FIND key—press and release to view options 

for a page. Press twice to view the Main Menu. Press 

and hold to display the Find Menu.

QUIT/PAGE key—press to cycle through the main 

pages. Press and release to cancel data entry or exit a 

page. Press and hold to turn the electronic compass on 

or off (Vista HCx and Summit HC only).

ENTER/ROCKER key—press and release to 

enter selected options and data or confirm on-screen 

messages. Press and hold to mark your current location 

as a waypoint. Move up, down, right, or left to move 

through lists; select fields, on-screen buttons, or icons; 

enter data; or to move the map panning arrow.

1.  Remove the battery

cover from the back

of the unit. Turn

the D-Ring 1/4 turn

counter-clockwise

and pull the cover

away.

2.  Insert two AA

batteries.

3.  Replace the battery

cover, turning the

D-Ring 1/4 turn

clockwise to lock in

place.

1.

Press and hold

POWER. A tone sounds, and the

Introduction page appears, followed by the Satellite page.

 The GPS receiver begins searching for satellite signals.

When the receiver has signals from at least three

satellites, the display at the top of the page indicates

position accuracy and location coordinates.

2.  Press

QUIT repeatedly until the Map page appears. You

are now ready to begin GPS-aided navigation.

1.  Press and quickly release

POWER to open the

backlight adjustment slider.

2.  Press up on the

ROCKER to increase the

brightness, or press down to decrease.

3.  Press

ENTER or QUIT to close the backlight

adjustment window.

Battery compartment

PUSH

TO

EJECT

Locking pin 

slot

microSD

™

or 

TransFlash™  

card slot

(Vista HCx and 

Legend HCx only)

1.

Access the Routes page from the Main

Menu. Saved routes are listed.

2.  Use the

ROCKER to select New,

and then press

ENTER to display the

Route Setup page.

3.  With an empty row (dashed) at the top

selected, press

ENTER to open the

keyboard. Name the route or allow it to

auto-name.

4.   Move down to the

Point> field, and press ENTER.

5.  Use the Find Menu to select a waypoint

from the Find Menu map item groups.

Open the information page for the item,

select

Use, and press ENTER to add it

to the list of via points.

6.  To add more via points to your route,

repeat the process.

7.  When you have completed the route,

select

Navigate to begin navigation

using the Map page.

8.  Follow the instructions at the top of the

Map page. Auto-routing and Turn-by-

turn prompts are provided by the Vista

HCx and Legend HCx only.

9.  To stop navigation at any time, press

MENU, select Stop Navigation,

and press

ENTER. The route is

automatically saved to the Routes list

(Vista HCx/Summit HC only)

WARNING: See the Important Safety and Product Information 

sheet in the product box for product warnings and other important 

information.