Руководство Пользователя для Garmin 660

Appendix

Do not leave your zūmo in direct 

sunlight. Avoid prolonged exposure to 

excessive heat.

CauTion: When replacing the fuse, do 

not lose any of the small pieces, and ensure 

they are put back in the proper place. 

If your unit does not charge in your vehicle, 

you may need to replace the fuse located at 

the tip of the automotive adapter.

1.  Unscrew the black, round end piece, and 

remove it. 

2.  Remove the fuse (glass and silver 

cylinder), and replace with a 3A fast‑blow 

fuse. 

3.  Ensure that the silver tip 

is placed in the black end 

piece. Screw on the black 

end piece. 

•

Your zūmo must acquire GPS (Global 

Positioning System) satellite signals to 

navigate. If you are indoors, near tall 

buildings or trees, or in a parking garage, 

your zūmo cannot acquire satellites. Go 

outside to an area free from tall obstructions 

to use your zūmo. 
When your zūmo has acquired satellite 

signals, the signal strength bars on the Menu 

page are green 

. When it loses satellite 

signals, the bars turn red or clear 

. 

For more information about GPS, go to 

Use the enclosed mounting disk to mount 

your unit to the dashboard and comply with 

certain state regulations. 

CauTion: The permanent mounting 

adhesive is extremely difficult to remove 

after it is installed. 

1.  Clean and dry the dashboard where you 

are placing the disk.

2.  Remove the backing from the adhesive 

on the bottom of the disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover from the 

top of the disk.

5.  Place the suction cup mount on top of 

the disk. Flip the lever down (toward the 

disk).