Инструкции Пользователя для Garmin trail guide

C

USTOMIZING

 Y

OUR

 T

RAIL

 G

UIDE

> 

C

HANGING

 

THE

 T

RACK

 S

ETUP

As you travel, the Trail Guide automatically records your path in 

the Track Log, creating an electronic “bread crumb” trail. This 

feature can be enabled or disabled from the Track Setup page. By 

default, it is enabled. 
Press MENU two times, highlight Track Setup, and press OK.
Track Recording—select Enabled to record tracks or Disabled to 

stop tracks from being recorded.
Wrap When Full—select On to allow new track points to replace 

the oldest track points once the log is full. If set to Off, no new 

tracks are added until the Track log is cleared.
Record Interval—sets the interval at which track points are 

recorded. With Auto, track points are recorded using a formula and 

the setting you choose in the Resolution field.
Resolution—selects the frequency at which you want track points 

to be recorded based on how you set Record Interval (above). 

Higher resolutions cause the track log to fill up more quickly.

Percentage Full—shows the percentage of track memory used.
Clear Track—clears all of the points of the track log. 
To restore these settings, press the 

MENU key, highlight Restore 

Settings, and press OK.