Руководство Пользователя для Kodak i250

C-2

A-61167   April 2005 

 

1. Make sure that the scanner is powered down and there are no documents 

in the feeder area.

2. Disconnect the power cord from the back of the scanner.

3. Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on 

the back of the scanner.

4. Lift up the scanner door release to unlatch the scanner door.

5. Pull up to open the scanner door.

6. Remove the output tray.

7. Lift up the scanner door release again and open the scanner door past the 

circuit board cover. 

8. Use a Phillips-head screwdriver to remove the two screws (one front, one 

back) that hold the circuit board cover in place.

Circuit board cover