Руководство Пользователя для Kodak i1210

A-61560   January 2007

7

Following is the minimum recommended system configuration to run 
Kodak i1200/i1300 Series Scanners.
• Recommended PC configuration:

- For documents up to 356 mm (14 in.) long up to 400 dpi: Pentium 

IV, 3.2 GHz processor, 512 MB RAM

- For documents up to 660 mm (26 in.) long up to 400 dpi: Pentium 

IV, 3.2 GHz processor, 1 GB RAM

- For longer documents/higher resolutions: Pentium IV, 3.2 GHz 

processor, 3 GB RAM

• USB port 2.0 (compatible with USB 1.1 but at slower speeds) 
• Microsoft Windows XP SP2, (supports USB 2.0); Windows XP 64-bit 

edition and Windows 2000 Professional (supports USB 2.0)

• 100 MB free hard disk space
• CD-ROM drive

Install the scanner in the following order:

1. Install the Kodak Driver Software on the PC.

2. Connect the power cord to the scanner.

3. Connect the USB cable between your scanner and PC.

4. Attach the output tray.

5. Turn on scanner power and finalize the Kodak Driver Software 

installation.

6. Verify your scanner installation (see Chapter 3). 

7. Install other supplied scanning applications (See Chapter 3).

Installing the Kodak 
Driver Software

Install the driver software before connecting the scanner to your PC. 

1. Insert the installation CD in the CD-ROM drive. The installation 

program starts automatically.

NOTES:

• If the CD does not start automatically, open the My Computer 

icon on your desktop. Double-click the icon for your CD-ROM 
drive, then double-click on

 

Setup.exe.

• The i1200 and i1300 Series Scanners have separate installation 

CDs. If you have both scanners in your environment, be sure to 
use the correct installation CD.

2. Select Install Scanner Software.