Руководство Пользователя для Kodak i1210

110

A-61560 January 2007 

6. Insert the feed module by aligning the pins and pushing it toward the 

left to fit it into position. Be sure the gears are aligned and it snaps 
into place.

7. Reinstall the feed module cover by aligning the tabs in the slots and 

pushing the feed module cover down until it snaps into place.

1. Remove the feed module cover and feed module as outlined in the 

previous section.

2. Remove one core assembly by lifting up and out of position.

3. Replace each tire by sliding the tire off the core.

4. Install each new tire by gently pulling it over the core.

Core assembly