Руководство Пользователя для Kodak i1210

82

A-61560 January 2007 

The Debug tab allows you to store the communications between the 
scanner and a scanning application to a file that can be reviewed later. 
In addition, the resulting images (both before and after image 
processing has been done) can be saved.

Logging — saves the communications between the scanner and a 
scanning application to a file for later review. Click the drop-down box to 
select from Off (the default), On or Custom. It is suggested that you do 
not use the Custom setting unless directed to do so by Kodak support 
personnel.

Flag — by default, this is 1. Leave the flag at 1 unless instructed to use 
another value by Kodak support personnel. 

Filter — captures only those items in the scanner to the application 
communication stream desired and filters out anything else. Options 
are x, y and z.

Images - Received From Scanner — normally, it is not necessary to 
save the images received from the scanner before your selected image 
processing options are applied. Use this checkbox when instructed by 
Kodak support personnel.

• Save: click this checkbox to save raw images from the scanner 

(before image processing is applied).

• File prefix: use a relevant file prefix to more easily find and sort the 

saved images. Raw is the default.

• Held in memory: determines the number of images to save before 

the images are overwritten. Normally, only one or two are needed. 
Adjust as necessary.