Руководство Пользователя для Coby tf-tv1212

R

PC Function               

You can use the unit's TFT LCD as your computer's monitor. 

1. Shut down the unit and the computer. Connect the unit to the computer VGA jack by the VGA cable. 

2. Turn on the player and the computer. If the unit is in the standby mode, press POWER button    

    to switch on. Press the MODE button to select the "PC" mode. 

Various features can be preset through the PC setup menu.

PC setup menu consists of four menus. They are Picture Menu, Audio Menu, Time Menu as well as  

Option Menu 

1. Press MENU to show the menu window.

2. Press the left/right direciton button to select the menu, press OK to enter the menu.

While working with the menu, 

1. Press the up/down direction button to select the item. 

2. Press the left/right direction button to adjust 

3. Press MENU to exit.

 

Note: Refer to the TV section for details on Picture Setup , Audio Setup,  

          Time Setup as well as Option Setup. 

Upon switching to the PC mode, the moniter will be automatically regulated for a 

proper functioning. If the result is not up to your expectation, please perform the

following steps to adjust the screen manually .

1.  Select “Auto” under the “PC Setup Menu” and press the right button to start 

     autu-adjusting. ( Option Menu - - > PC Setup Menu - - > Auto )  

2. Or if you still have problem with the monitor after, adjust “H-Position”, 

     V-Position”, ”Clock “ as well as “Phase” accordingly under the 

     PC Setup menu.

     

No power

No picture

No sound

Make sure the unit has been powered on manually.

Check if the power cord has been properly connected to the power outlet.

Check if the main power has been switched on.

Try another TV channel 

  Check if the system connection is proper and secure.

  Check if the connection cables are damaged.

Increase the volume.

Check if the MUTE function of the unit has been activated.

Check if the sound system has been properly set.

Check if the AV audio signal input cable has been connected properly.

Color distorted

Reset the color system of the unit.

Check if the system has been properly connected.

Check if the AV video signal input cable is connected properly.

Picture and 

sound are interfered 

 Check if the system has been properly connected.

 If using antenna, adjust the antenna.

Remote control does 

not work

Make sure the POWER button on the unit has been turned on manually.

Remove the obstacles between the remote control and the player.

Point the remote control towards the remote sensor on the player.

Check if the batteries of the remote control have been loaded with correct polarities.

Replace the batteries of the remote control.

Malfunction

Should the player develop a malfunction, unplug the player for 30 minutes. After that, 

power on the player and the restore function should reset the player.

Design, specifications and manual are subject to change without prior notice.