Справочник Пользователя для Integra cdc-3

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 0720-31-8111 Fax: 0720-33-5222

ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramesy, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: onkyo@onkyousa.com

ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
Tel: 089 84 93 20 Fax: 089 84 93 226 E-mail: info@onkyo.de

ONKYO CHINA LIMITED
Units 2102-7, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852 2429 3118 Fax: 852 2428 9039

http://www.onkyo.co.jp/

HOMEPAGE

SN 29342785

I9905-1

Troubleshooting Guide

•

No power.

Cause:

Power cable is not properly plugged into the AC outlet.

Remedy:

Insert the power plug firmly.

•

A disc is loaded in the disc tray, but playback will not start.

Cause:

A disc in the disc tray may be upside down.

Remedy:

Load the disc with the label facing upward.

Cause:

The disc is dirty.

Remedy:

Clean the disc.

Cause:

Moisture has accumulated inside the CD changer.

Remedy:

Remove the disc from the disc tray, place the CD
changer in a warm place, and leave the power on for
about one hour.

•

No sound is heard.

Cause:

Connections may be incomplete or incorrect.

Remedy:

Check all cable connections. Insert all the plugs firmly
into the jacks.

Cause:

The input selector switch on the amplifier may be set incor-
rectly.

Remedy:

Set the switch to the proper position. See your ampli-
fier’s operating instructions for more information.

•

Disc playback skips.

Cause:

The disc is dirty.

Remedy:

Clean the disc.

Cause:

A disc is scratched.

Remedy:

Replace the disc.

Cause:

The CD changer is subject to being accidentally bumped.

Remedy:

Place the CD changer in a more stable location.

•

Search time (when locating a specific track) is extremely
long.

Cause:

The disc is dirty.

Remedy:

Clean the disc.

Cause:

The disc is scratched.

Remedy:

Replace the disc.

•

Track numbers cannot be stored in memory.

Cause:

No disc in the tray.

Remedy:

Load a disc in the tray.

Cause:

You have entered a track number that does not exist on the
disc.

Remedy:

Use only the track numbers that exist on the disc.

•

Front panel controls function correctly, but remote control-
ler does not.

Cause:

No batteries in remote controller.

Remedy:

Insert batteries.

Cause:

Batteries have worn out.

Remedy:

Replace batteries.

Because the unit contains a microcomputer to provide advanced
functions, it may malfunction due to external noise or static elec-
tricity. If this happens, press the POWER switch on the unit and
then press it in again after about five seconds.

Specifications

Signal readout system:

Optical non-contact

Reading rotation:

About 500 - 200 r.p.m.

(constant linear velocity)
Linear velocity:

1.2 - 1.4 m/s

Error correction system:

Cross Interleave Reed-Solomon code

D/A converter:

1 bit PWM/ACCUPULSE

Sampling frequency:

352.8 kHz (8 times oversampling)

Number of channels:

2 (stereo)

Frequency response:

5 Hz - 20 kHz

Total harmonic distortion:

0.005% (at 1 kHz)

Dynamic range:

96 dB

Signal to noise ratio:

92 dB

Channel separation:

92 dB (at 1 kHz)

Wow and Flutter:

Below threshold of measurability

Output level:

2 volts r.m.s.

Power consumption:

10 watts

Power supply:

AC 120 V, 60 Hz

Dimensions (W

D):

435

131

433mm

(17-1/8"

5-3/16"

17-1/16")

Weight:

6.9 kg (15.2 lbs.)

Specifications and features are subject to change without notice.