Руководство Пользователя для Aethra d2000pro
Quick Guide
VX2000
6
GB
SAFETY RULES
The change from cold to hot environments can cause the formation of
condense inside the device. To avoid malfunctioning, wait at least 2 hours
before connecting the device to the supply mains.
condense inside the device. To avoid malfunctioning, wait at least 2 hours
before connecting the device to the supply mains.
Do not access internal parts of the device (and/or of the power supply unit).
If objects or liquids penetrate inside the device, immediately disconnect the
power supply cable. Before using the device again, have it checked by
specialised staff.
power supply cable. Before using the device again, have it checked by
specialised staff.
Refer to qualified staff for service.
In case of intervention, always check that the power supply has been
completely and successfully disconnected.
completely and successfully disconnected.
In case of fire, absolutely avoid using water to extinguish it.
WARNINGS
ATTENTION:
Many of the components used in this device are sensitive to
electrostatic charge.
Many of the components used in this device are sensitive to
electrostatic charge.
In case of manipulation of the connection cables, disconnect the
power supply and avoid direct contacts with the connector terminals.
power supply and avoid direct contacts with the connector terminals.
When handling electronic components, to eliminate any static
electricity touch a grounded surface. If possible, wear a grounding
armband.
electricity touch a grounded surface. If possible, wear a grounding
armband.
Failure to comply with these warnings could cause permanent
damage to device.
damage to device.
To guarantee continuous protection for operator safety, only use the
mains adapter supplied with the instrument.
mains adapter supplied with the instrument.