Руководство Пользователя для Dwin transvision

- 11 of 23 -

q 

From the Main menu scroll up \ or  down ] to highlight the “Input”
option.

q 

Use left ` or right a   buttons to sequentially select the input sources.

q 

Or use the numbered buttons 1 through 9 on the remote  control for
direct switching of inputs.

For composite video inputs, press 1 and 2; for S-Video inputs, press 3
and 4; for component video inputs,  press 5, 6 and 7; and for RGB
inputs, press 8 and 9.

1.  Video 1
2.  Video 2
3.  S-Video 1
4.  S-Video 2
5.  Component 1
6.  Component 2
7.  Component 3
8.  RGB 1
9.  RGB 2

q 

From the Main menu scroll up _ or down _ to highlight the  “Aspect
Ratio” option. This enables to select the aspect ratio.

q 

Use left _ or right _  buttons to sequentially select the aspect ratio.

q 

Or use the numbered buttons 1 through 3 on the remote  control for
direct selection.

     Press ALT 1 for 4:3 Std; press ALT 2 for anamorphic;
     press ALT 3 for letterbox.

Input 

Setup 

Video 

Video 1 

  Aspect Ratio         Letterbox 

   1.  4 x 3 STD
   2.  Anamorphic
   3.  Letterbox

Once an aspect ratio is selected for a specific input, it will be entered into the system memory so that
the next time that input is selected, the same aspect ratio will appear.

Aspect ratio selection is only available for 480i, 480i, 480p or 580p signals. For 540p, 720p and 1080i
signals, the system will automatically select the 16:9 aspect ratio.

To automatically select the aspect ratio that best matches the input signal, press the FAV button on the
remote. The unit will then analyze the signal and adjust the aspect ratio accordingly.

q 

From the Main menu scroll up _ or down _ to highlight the “Video” option.

q 

Use left _ or right _  buttons to advance to the “Video Control” menu.

  

Brightness 

Color 

Tint 

Sharpness 

50 

50 

50 

50 

2 

50 

DWIN®    TRANSVISION™    

Input   

Setup   

Video   

Video 1   

   

Aspect Ratio         4:3  STD    

  

Video  Controls