Руководство Пользователя для Dwin transvision

- 14 of 23 -

The Image Setup menu allows you to position and adjust the
video image size. Video image parameters vary from different
video sources and must be adjusted to properly fit the screen.

q 

Select either the “H-Position,” “H-size,” “V-Position,” or
“V-size”  option in the “Image Options” menu.

q 

Use the left ` or right abuttons to set the desired image size
or position.

The “Auto Setup” option operates for RGB inputs only.  The “Auto Setup” option measures the video
image boundaries and automatically positions and adjusts the projected image size to properly fit the
screen.

The TransVision™ determines the video signal type by measuring
horizontal and vertical scanning frequencies. If the video signal
matches a predefined video source,  the TransVision™ selects
video image settings from the system’s memory.

The predefined video sources include: 480i, 480p, 580i, 580p,
1080i, 540p, and 720p.

In addition to predefined video sources, the TransVision allows the
user to create up to three new video source memory locations per
video input.

When a new video source is applied the TransVision™ displays
“New Video Source” message. To create a new source memory,
go to the Image Setup menu.

q 

Use left ` or right a   buttons, to select “Yes.”

q 

Press ENTER.

The Relay Setup allows you to assign the TransVision™’s RY1 and RY2 screen trigger outputs to
particular aspect ratio for screen masking.

-

Relay is off.

Power -

Relay is on when the unit is on.

-

Relay is on when 4:3 Aspect Ratio is selected.

-

Relay is on when Anamorphic or LetterBox  Aspect Ratios are selected.

Relay 1         OFF      Power 

4:3

16:9

Relay 2         OFF      Power

4:3

16:9

Auto Setup    ¡

H-Position     218

 H-Size          1286

 V-Position     22

 V-Size           598

Highlight  Yes
and press “ENTER”
to save

 No           Yes