Руководство Пользователя для Ingersoll-Rand air impact wrench - 3
45646247_ed2
EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power
output can be further reduced in forward or reverse by using the variable throttle.
Product Specifications
Model
Style
Drive
Impacts
per
min.
Recommended Torque Range
Type
Size
Forward
ft-lb (Nm)
Reverse
ft-lb (Nm)
259
Pistol
Square
3/4” 1000
200-800 [1050 Max.]
(272-1085 [1424 Max.])
200-800 [1050 Max.]
(272-1085 [1424 Max.])
Model
Impacting
Sound Level dB (A)
(ISO15744)
Free Speed
Sound Level dB (A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
† Pressure (L
p
)
‡ Power (L
w
)
† Pressure
‡ Power
Level
*K
259
91.6
102.6
96.5
107.5
6.4
0.8
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity
* K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects.
See drawing 16619702 and table on page 2. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
6.
Thread size
2. Regulator
7.
Coupling
3. Lubricator
8.
Safety Air Fuse
4. Emergency shut-off valve
9.
Oil
5. Hose diameter
10. Grease
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.